Maintenance; Blade Change - Scheppach wox d 700sl Mode D'emploi

Maintenance

• Maintenance, repair and cleaning operations and
malfunctions only when the PTO (power plug) make out.
Replacing the saw blade.
Remove the spark plug connector.
Wait for standstill and let the machine cool down.

Blade change

• The blade change can be made only in firewood cutting
position.
• Side cover open.
• The locking pin (1) through the lower blade guard to lock
the saw blade stuck.
• M12 bolt the saw blade with the supplied hexagonal
wrench (2) solve
• Saw blade change
• M12 screw tighten with spanner fixed to 90 Nm.
Warning! Ensure the correct rotational direction of the saw
blade when replacing it.
Tightening the drive belt, Fig. 4
Loosen the 4 bolts (a) under the engine plate, loosen the lock
nut (c) and retighten the drive belts with the tensioning screw
(d). Tighten the lock nut again.
Abb.1
Abb.4
a
a
2
1
b
c
d
Seite:41