Care And Cleaning - Zanussi ZHRN642K Notice D'utilisation

Masquer les pouces Voir aussi pour ZHRN642K:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Heat setting
7 - 8
9

CARE AND CLEANING

WARNING! Refer to Safety chapters.
GENERAL INFORMATION
Clean the hob after each use.
Always use cookware with a clean base.
Scratches or dark stains on the surface have no
effect on how the hob operates.
Use a special cleaner suitable for the surface of
the hob.
Use a special scraper for the glass.
CLEANING THE HOB
Remove immediately: melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
You cannot activate or operate
the hob.
10
Use to:
Heavy fry, hash browns, loin
steaks, steaks.
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
The hob is not connected to an
electrical supply or it is con-
nected incorrectly.
The fuse is blown.
You do not set the heat setting
for 10 seconds.
Time
(min)
5 - 15
dirt can cause damage to the hob. Take care to
avoid burns. Use a special hob scraper on the
glass surface at an acute angle and move the
blade on the surface.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
moist cloth and a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft cloth.
Remove shiny metallic discoloration: use a
solution of water with vinegar and clean the
glass surface with a cloth.
Possible cause
Hints
Turn halfway through.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection
diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Activate the hob again and set
the heat setting in less than 10
seconds.

Publicité

Table des Matières
loading

Table des Matières