Cleaning And Maintenance - HQ Power VDP1500SM3TC Mode D'emploi

 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Keep this manual for future reference.
4. Operation
Refer to the illustrations on page 2 of this manual.
1 Function key
 Press 1 time to enter the menu
 Press 2 times to enter the waiting time menu
 Press 3 times to enter the working setting menu
 Press 4 times to enter the smoke menu
 Press 5 times to enter the DMX address setting menu
 Press 6 times to confirm your selection and to exit the menu
All of the above menus can be modified with keys 2 and 3.
2 Up key
3 Down key
4 Timer key
Press this key to enter the timer function. Modify with keys 2 and 3.
5 Volume key
Press this key to enter the smoke menu. Modify the amount of
ejected smoke with keys 2 and 3.
6 Manual key
Press this key to eject smoke, release to stop.

5. Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents to clean
the detector.
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 12/09/2014
VDPLBTL
4 ©Velleman nv