Fresh Appliance; E10 - FoodSaver FM1100 Série Notice D'emploi

How to...
Marinate with your FoodSaver
Your FoodSaver Fresh Appliance allows you to quickly marinate foods.
®
The FoodSaver ® Fresh Containers are great to marinate foods.
STEP 1
Prepare enough of your favorite marinade to fully cover food inside the
fresh container. Press firmly on all sides to ensure lid is properly closed
(Fig. 1).
NOTE: Always leave at least one inch (2.54 centimeters) of space
between contents and top of rim.
NOTE: Make sure rubber gasket underneath lid as well as rim of
container is free from food materials.
STEP 2
Place container on unit base using platform as a guide (Fig. 2). Please
make sure to position container with oval valve and dimple of freshness
on lid.
STEP 3
Simultaneously press both release buttons at the vacuum head to
adjust its height (Fig. 3). Guide the vacuum port until it clicks onto
the container, the green ready indicator will turn on.
STEP 4
Push start button to initiate quick marinate process (Fig. 4).
STEP 5
The vacuum indicator on the container "dimple" will form early
during the vacuum sealing process. Do not stop the process. Allow
the vacuum to complete the cycle before removing the container from
the machine. The unit will stop automatically once the container is
vacuum sealed (Fig. 5).
STEP 6
Simultaneously press both release buttons again to lift vacuum head
up and remove fresh container (Fig. 6). Leave the food vacuum sealed
for 20 minutes to make sure the marinate penetrates the food.
Go to www.foodsaver.ca for additional hints,
tips, instructional videos and information about
how to purchase FoodSaver parts and accessories.
®
E9 www.FoodSaver.ca
FM1100_FM1200_FM1500 Series_16EFM1.indd 9-10

Fresh Appliance

®
Fig. 1
Fig. 2
Fig. 3
1 2
Fig. 4
Fig. 5
Fig. 6
1 2
Care
and Cleaning of your Fresh Appliance
To Clean Appliance:
STEP 1
Remove Power Cord from electrical outlet.
STEP 2
Slide out reservoir after each use, when liquids or powder/crumbs are visible, to empty it out and clean it.
To remove reservoir, hold it with two fingers and pull down. Gasket on reservoir may also be removed for
cleaning. Check gasket to ensure it is free from food residues. Clean it with warm soapy water and let dry.
STEP 3
Wash the reservoir in warm soapy water.
CAUTION: Do not immerse cord, plug or appliance in water or other liquids.
STEP 4
Air dry before replacing.
STEP 5
Check Vacuum Port and the Track to make sure it is free from food materials and wipe it clean.
To Clean the Container Vacuum Valve:
STEP 1
Remove the vacuum valve cover from the lid.
STEP 2
Remove both pieces of the vacuum valve.
STEP 3
Carefully wash the parts by hand with a soft sponge.
STEP 4
Rinse and dry all parts.
STEP 5
Replace vacuum valve pieces and valve cover on cleaned lid.
Go to www.foodsaver.ca for additional hints, tips, instructional videos and information about how to purchase
FoodSaver ® parts and accessories.
Service: 1.877.804.5383

E10

12/20/16 10:21