Fresh Containers; Zipper Bags - FoodSaver FM1100 Série Notice D'emploi

How to...
Vacuum Seal with FoodSaver
STEP 1
Place food or item to be vacuum sealed inside FoodSaver
container. Press firmly on all sides to ensure lid is properly closed
(Fig. 1).
STEP 2
Place container on unit base using platform as a guide (Fig. 2).
STEP 3
Simultaneously press both release buttons at the vacuum head to
adjust its height (Fig. 3). Press the vacuum head on the container
until it clicks, the green ready indicator will turn on.
NOTE: The green light will only illuminate if the vacuum head has
made secure contact with the top of the container.
STEP 4
Push start button to initiate vacuum sealing process (Fig. 4).
STEP 5
The vacuum indicator on the container "dimple" will form early
during the vacuum sealing process. Do not stop the process. Allow
the vacuum to complete the cycle before removing the container from
the machine. The unit will stop automatically once the container is
vacuum sealed (Fig. 5).
NOTE: If the food you are vacuum sealing contains flour, bread crumbs
or other powdery foods, some of it might be sucked out of container
and will be stored in reservoir located at vacuum head. If it fills out
completely, the unit will automatically stop working. Please make sure
to empty it out and clean after each use.
STEP 6
Simultaneously press both release buttons again to lift vacuum head
up and remove fresh container (Fig. 6). Now you can store your fresh
container in refrigerator, pantry or take on the go.
Go to www.foodsaver.ca for additional hints,
tips, instructional videos and information about
how to purchase FoodSaver parts and accessories.
®
E7 www.FoodSaver.ca
FM1100_FM1200_FM1500 Series_16EFM1.indd 7-8

Fresh Containers

®
Fig. 1
® fresh
Fig. 2
Fig. 3
1 2
Fig. 4
Fig. 5
Fig. 6
1 2
How to...
Vacuum Seal with FoodSaver
STEP 1
Place food or item to be vacuum sealed inside FoodSaver
STEP 2
Place FoodSaver ® Zipper Bag on unit base using platform of as a guide
to place and align zipper bag valve (Fig. 1).
STEP 3
Simultaneously press both release buttons at the vacuum head to
adjust its height (Fig. 2). Press the vacuum head on the FoodSaver
Zipper Bag (Fig. 3) until it clicks, the green ready indicator will turn
on.
NOTE: The green light will only illuminate if the vacuum head has
made secure contact with the top of the FoodSaver
STEP 4
Push start button to initiate vacuum sealing process (Fig. 4). Push the
Start Button again when you are done vacuum sealing the FoodSaver
Zipper Bag.
NOTE: You may need to cancel the vacuum sealing process when
dealing with delicate foods. In order to do that just push the Start
Button and the unit will stop vacuum sealing.
STEP 5
When you are done vacuum sealing press both release buttons
simultaneously again to lift vacuum head up and remove fresh Zipper
Bag (Fig. 5). Now you can store the Zipper Bag in refrigerator, pantry or
take on the go.
NOTE: The FoodSaver ® Zipper Bags should not be used to vacuum
seal liquids. If vacuuming moist foods, ensure that the liquid does
not reach the Zipper Bag valve and check and clean the Fresh
Appliance reservoir as needed.
Go to www.foodsaver.ca for additional hints,
tips, instructional videos and information about
how to purchase FoodSaver ® parts and accessories.
Service: 1.877.804.5383

Zipper Bags

®
® Zipper Bag.
®
1 2
Zipper Bag.
®
®
1 2
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
E8
12/20/16 10:21