Ferplast CAPRI LED 50 Manuel D'utilisation page 8

CAPRI LED aquariums
GB
7 If live plants are being used, we recommend laying about 1 cm of fertilized gravel on the bottom of the tank and 2 cm of gravel. Fill the
IT
aquarium by pouring water onto a at dish placed on the bottom to prevent the material used to create the base from being moved about.
8 We recommend lighting the aquarium for about 8 hours a day: if there are signs of excessive algae development, reduce the lighting to 7 hours;
if the plants have di culty growing, increase to 9-10 hours.
9 To care for and protect your sh, it is strongly advised to wait until the lter has matured: the rst sh should only be introduced 10-12 days
FR
after the addition of BLUSTART lter activator capsules. Before doing so, it is in any case advisable to check the readings and chemical levels
of the water using the special MULTISTICK TESTER by Ferplast. Your local retailer will be able to advise you on the ideal water temperature,
hardness etc., according to the type of sh and plants you have decided to keep in your CAPRI aquarium. It is advisable to repeat these tests
regularly.
D
10 During the lter maturing period, add a small quantity of dry food each day: this will help the formation of bacterial ora.
11 When adding the sh, insert the remaining BLUSTART lter activator capsules in the rst lter compartment.
12 We recommend not putting too many sh into the aquarium all at once, but building up to the maximum population gradually.
13 Your retailer will be able to advise you on the choice of sh to keep in your CAPRI LED aquarium, the quantity and type of food to use and the
feeding frequency.
NL
CAPRI LED AQUARIUM MAINTENANCE
The main maintenance procedures we recommend, in addition to the daily provision of food and regular checking of the temperature and
chemical levels, are:
ES
• siphoning the bottom when required using the special aquarium gravel cleaner BLU 9025/9027 on sale at your local retailer;
• adding demineralised water to replace that which is lost by evaporation. Remember that the internal lter must always be submerged;
• replacing 5-10% of the water with demineralised water at least monthly;
• replacing the LED lamps is not necessary. On the contrary, it is necessary in case of uorescent ones,
PT
• cleaning the inside of the aquarium using oating magnetic brushes BLU 9031/9036/9038/9039 designed by Ferplast.
BLUWAVE FILTER MAINTENANCE
The main maintenance procedures we recommend are:
SK
A Rinsing all the mechanical ltration sponges at least every 2-3 weeks (9);
B Replacing the mechanical ltration sponges at least every 6 months;
C The e ect of the adsorbent sponge ceases in about 2-3 weeks; we therefore advise, if necessary, replacing it with a Ferplast replacement
sponge available from leading retailers or leaving it in the lter to perform a mechanical function. In any case, it should be changed at least
every 6 months (10);
CS
D During periods when the sh are being treated with a solution added to the water for illness or disease, the adsorbent sponge should be
removed from the lter (so this does not reduce the bene cial e ects of the treatment). When the treatment is over, we recommend putting
in a new sponge;
E Always keeping the lter intake grilles clean;
HU
F Checking the pump at least every 6 months and cleaning it when necessary in the following way:
• unscrew the lter top;
• remove the pump unit, adsorbent sponge and return pipe from the lter, pulling it upwards (10 a);
• remove the pump from the return pipe, remove the front section and remove the rotor (11);
SV
• remove any lime scale or impurities with the soft brush BLU 9037 (never use detergents or chemical substances);
• re-assemble the unit following these instructions in reverse.
G The biological materials should not be washed. Therefore, we suggest never removing them from the lter so they retain their active bacterial
properties.
DA
PL
GUARANTEE. This product, all its parts and accessories are covered by warranty within the limits provided for in this paragraph and the legal
regulations currently in force. The guarantee only covers manufacturing defects and provides for free repair or replacement. The guarantee does
not cover damage and/or defects caused by carelessness, wear and tear, usage not in accordance with the instructions and warnings in this
RU
booklet, accidents, tampering, improper use, incorrect repairs and purchases not con rmed by receipt.
8