Device Description (Fig.1) - Scheppach PL285 Traduction Du Manuel D'utilisation Original

1. Intruduction
MANUFACTURER:
scheppach Fabrikation
von Holzbearbeitungsmaschinen
Günzburger Straße 69
89335 Ichenhausen
Germany
DEAR CUSTOMER,
We wish you much joy and success in working with your
new appliance.
NOTE:
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled workers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-com-
pliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations
RECOMMENDATIONS:
Read the entire text of the operating instructions prior to
the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and utilize
its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with your
machine and how to avoid dangers, save repair costs,
reduce downtime, and increase the reliability and work-
ing life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable regula-
tions of your country with respect to the operation of the
machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and care-
fully observed by each operator prior to starting the work.
Only persons who have been trained in the use of the
machine and have been informed on the related dangers
and risks are allowed to use the machine. The required
minimum age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

2. Device Description (Fig.1)

1. Laser
2. ON-OFF-Swithch Laser
3. Safety lock button
4. Cutting depth scale
5. ON-OFF-Switch
6. Lock-off-switch
7. Cutting depth setting
8. Flange screw
9. Saw blade
10. Guide fence slot
11. Lock screw for guide fence
12. Protective cover
13. Storage for Allen key
14. Power-on light
15. Soft grip
16. Spindle lock button
17. Dust collector plug
18. Base plate
3. Scope of delivery
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
4. Intended Use
The machine must only be used for its intended pur-
pose! Any other use is deemed to be a case of misuse.
The machine is used for:
For the sawing, longitudinally and transversely, of solid
wood, chipboard, plywood, plastic, aluminium by using
the TCT or HSS saw blade. For sawing tiles, printed
circuit boards or glass fiber reinforced plastic must be
used the diamond saw blade.
To use the machine properly you must also observe
and follow all safety regulations, the assembly inst-
ructions, operating and maintenance instructions lay
down in this manual.
All people who use and service the machine have to
be acquainted with this manual and must be informed
about the machine's potential hazards.
It is also imperative to observe the accident prevention
regulations in force in your area.
The same applies for the general rules of occupational
health and safety.
WARNING:
• Use only saw blades allowable for this machine!
• Never use a damaged saw blade!
• Use the machine never with defective or without
mounted guard
GB
15 І 56