Control And Connectors Distribution - Sibelmed Datospir aira F Guide Rapide

DATOSPIR
· User's Manual
USE OF THE DEVICE
Start the W20s Software and connect the device by Bluetooth or USB. Then, select the Spirometer
model and the type of connection in the Links screen (consult the W20s User's Manual).
To turn the device on or off, press and hold the key puntil the green LED lights up and
release the key.
To save energy, the equipment includes an auto-off system that shuts down the equipment
after three minutes without communications with the W20s spirometry software.
1. TRANSDUCER PLACEMENT (See Figure 1 on page 2).
2. MANEUVER PERFORMANCE (See Figure 2 on page 2).

CONTROL AND CONNECTORS DISTRIBUTION

Visual indicator
ON-OFF button
Batteries cover
Temperature sensor
USB connection
511-D00-GRM_Rev.1.00
EN