Festo DMSP Série Notice D'utilisation page 18

DMSP−... / MAS−...
Slowly pressurize the complete system.
S
In order to do this use pressure build−up
valve type HEL−... . This will prevent un
controlled movements from occurring.
Always use the product in its original
S
state without undertaking any
modifications.
5 Fitting
Mechanical components
Please note
Certain mechanical loadings of the contrac
tion membrane may damage the DMSP−... /
MAS−... .
S Ensure that the DMSP−... / MAS−... is
fitted free of torsional forces.
not fitted bent (crushed) even when
pressureless (no wrinkles).
Please note
If the thread of the adapter of type
MXAC−... is too long, the connecting thread
of the MAS−10−...−O will be damaged (no
force limitation).
S Make sure that the thread lengths of the
adapter and the MAS−... (see Fig. 8) are
suited to each other.
Lubricate the thread of the connecting adapter.
S
The assembly forces will then be reduced.
In order to fit the adapter as described in the section Accessories", screw it
S
into the fastening thread 1.
The appropriate tightening torque is specified in the table below.
18
Fig. 5
Ó Ó
Ó Ó
Ó Ó Ó Ó
Fig. 6
Ó Ó
Fig. 7
Ó Ó
Festo DMSP−... / MAS−... 0501c − English
Ó Ó
Ó Ó
Ó Ó Ó Ó
1