Changing The Uv-Tubes - Trotec B 500 Mode D'emploi

Changing UV-tubes
1 . Please first remove the switch panel as described
on page 5 . The UV-tube is located under the switch
panel, next to the pump motor .
2 . Pull out the UV-tube on the connecting cable and
replace the tube .
3 . Reattach the electrical connecting head to the UV-
tube properly and insert it into the glass tube again
with care .
The UV-lamp is to be disposed of in accordance with
legal requirements .
The UV-tube has an operating life of about 5000
hours .
m Please take care that the quartz glass body
in which the source sits is not damaged
when fitting and removing the UV-source.
All accessories can be retrofitted at any time at the
factory or by an authorised dealer .
Connecting cable
Glass tube
Connecting head
Metal housing
UV-tube with lime converter cartridge
m In order to ensure perfect operation, only
use Original Replacement Filters and Origi-
nal Replacement Parts. We undertake no re-
sponsibility or warranty for any water dam-
age or reductions in performance.
B - 12
Carefully remove upwards
Operating Manual – Electronic Humidifier EN