Water Pump; Hygiene Products - Trotec B 500 Mode D'emploi

Main Sub- Description
menu menu
25 Relay active when no radio
signal
26 Relay switch status
(Low= Relay active open
High= Relay active closed)
Main Sub- Description
menu menu
30 Rinsing setting
31 Rinse cycle in days
32 Water hardness setting
33 Resetting the filter
change indicator
34 Operation via external
time switch or other 230V
switching mechanism
35 Setting/Changing interval
of the fan in auto-mode

17. Water pump

The immersion pump can be removed from the centre
plate by turning it in the
direction indicated by the
arrow . Take particular
care when installing the
pump to ensure that the
plug connection as well as
the pump hoses and the
Y-piece, or on devices with
UV-technology the connec-
tion hoses to the V4 A-pipe,
are firmly fitted .
EN
Setting Comment
00 = OFF Only necessary with connection to a
01 = ON central air-conditioning system
00 = OFF Only necessary with connection to a
01 = ON central air-conditioning system
Setting
00 = OFF
(manuell)
01 . . . 07 days
01 = soft
02 = medium
03 = hard
98 = reset
00 = OFF
01 = ON
01 ... 10 min .

18. Hygiene products

To prevent the development of germs, algae, mould
or bacteria and the odours they cause in the water
container of a humidifier, we recommend the use of
adequate hygiene products
such as LiQVit and Secosan .
Secosan can be placed di-
rectly in the water container .
When exchanging the water
in the reservoir, simply take
it out and the Secosan Stick
can be used again . Depend-
ing on the volume of the
Operating Manual – Electronic Humidifier
Comment
If rinsing is existent
Water hardness affects the filter
change display interval
The display „98 - .00" shows in how
many days the filter will have to be
changed . The display can be reset to
98 days at any time
REQUIRED humidity level is fixed at
90% . The ACTUAL display shows a
constant 00%rF . The fan can be set
freely at any suitable speed
Dependent on the size of the room
Factory
setting
00
00
Factory
setting
07
02
98
00
B - 9