Maintenance And Inspections - Canon imagePRESS C850 Guide Rapide

• Do not disassemble or modify this machine. There
are high-voltage and high-temperature
components inside the machine. Disassembly or
modifi cation may result in a fi re or electrical shock.
• Place the machine where children will not come in
contact with the power cord and other cables or
gears and electrical parts inside the machine. Failure
to do so may result in unexpected accidents.
Do not use fl ammable sprays near this machine.
•
If fl ammable substances come into contact
with electrical parts inside this machine, it may
result in a fi re or electrical shock.
When moving this machine, be sure to turn OFF
•
the power of this machine, and then unplug the
power plug and interface cables. Failure to do
so may damage the power cord or interface
cables, resulting in a fi re or electrical shock.
• When plugging or unplugging a USB cable when
the power plug is plugged into an AC power
outlet, do not touch the metal part of the
connector, as this may result in an electrical shock.
• Use a modular cable that is shorter than 3 meters.
• Use a USB cable that is shorter than 3 meters.
If the operating noise concerns you
Depending on the use environment and
operating mode, if the operating noise is of
concern, it is recommended that the machine
be Installed in a place other than the offi ce.
If you are using a cardiac pacemaker
This machine generates a low level magnetic fl ux.
If you use a cardiac pacemaker and feel
abnormalities, please move away from this
machine and consult your physician immediately.
CAUTION
Do not place heavy objects on this machine
•
as they may fall, resulting in injury.
• For safety, unplug the power plug if the machine
will not be used for a long period of time.
Use caution when opening and closing
•
covers to avoid injury to your hands.
• Keep hands and clothing away from the rollers
in the output area. If the rollers catch your hands
or clothing, this may result in personal injury.
• The inside of the machine and the output slot are
very hot during and immediately after use. Avoid
contact with these areas to prevent burns. Also,
printed paper may be hot immediately after
being output, so use caution when handling it.
Failure to do so may result in burns.
Feeder (only for products with a feeder)
Do not press down hard on the feeder when
•
using the platen glass to make copies of thick
books. Doing so may damage the platen glass
and result in personal injury.
Close the feeder gently to avoid catching your
•
hands, as this may result in personal injury.
• Close the feeder gently to avoid catching
your hands in the back of the feeder, as this
may result in personal injury.
Finisher (only for products with a fi nisher)
• Do not place your hands in the part of the tray
where stapling is performed (near the rollers),
especially pay careful attention to the sharp
staples, as this may result in personal injury.
Paper drawer (only for products with a paper
drawer)
Do not insert your hand into the machine
•
while the paper drawer is removed, as this
may result in personal injury.
52
Energy Saver key (only for products with an
Energy Saver key)
• Press (Energy Saver) for safety when the machine
will not be used for a long period of time, such
as overnight. Also, turn OFF the main power switch,
and disconnect the power cord for safety when
the machine will not be used for an extended
period of time, such as during consecutive holidays.
Laser Safety
This product is confi rmed as a Class 1 laser
product in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
The laser beam can be harmful to human
bodies. Since radiation emitted inside the
product is completely confi ned within
protective housings and external covers, the
laser beam cannot escape from the machine
during any phase of user operation. Read the
following remarks and instructions for safety.
Never open covers other than those
•
instructed in the manuals for this machine.
• If the laser beam should escape and enter your
eyes, exposure may cause damage to your eyes.
CAUTION
Use of controls, adjustments, or performance of
procedures other than those specifi ed in this
manual may result in hazardous radiation exposure
Other precautions
Follow the instructions on the caution label
•
attached to this machine.
• Do not subject the machine to strong shocks
or vibration.
Do not forcibly open and close doors, covers,
•
and other parts. Doing so may result in
damage to the machine.
• Do not turn the main power switch OFF or
open the covers while the machine is in
operation. This may result in paper jams.

Maintenance and Inspections

Clean this machine periodically. If dust
accumulates, the machine may not operate
properly. When cleaning, be sure to observe the
following. If a problem occurs during operation,
see Troubleshooting. If the problem cannot be
resolved or you feel the machine requires an
inspection, see When a Problem Cannot Be Solved.
WARNING
• Before cleaning, turn OFF the power and
unplug the power plug from the AC power
outlet. Failure to do so may result in a fi re or
electrical shock.
• Unplug the power plug periodically and clean with
a dry cloth to remove dust and grime. Accumulated
dust may absorb humidity in the air and may result
in a fi re if it comes into contact with electricity.
• Use a damp, well wrung-out cloth to clean the
machine. Dampen cleaning cloths with water
only. Do not use alcohol, benzenes, paint thinners,
or other fl ammable substances. Do not use tissue
paper or paper towels. If these substances come
into contact with electrical parts inside the
machine, they may generate static electricity or
result in a fi re or electrical shock.
• Check the power cord and plug periodically for
rust, bent prongs, fraying, cracks, or excessive heat
generation. Use of poorly-maintained power cord
or plug may result in a fi re or electrical shock.
CAUTION
• The inside of the machine has high-temperature
and high-voltage components. Touching these
components may result in injury or burns. Do
not touch any part of the machine that is not
indicated in the manual.
When loading paper or removing jammed
•
paper, be careful not to cut your hands with
the edges of the paper.
Legal Limitations on the Usage of Your
Product and the Use of Images
Using your product to scan, print or otherwise reproduce
certain documents, and the use of such images as
scanned, printed or otherwise reproduced by your
product, may be prohibited by law and may result in
criminal and/or civil liability. A non-exhaustive list of these
documents is set forth below. This list is intended to be a
guide only. If you are uncertain about the legality of using
your product to scan, print or otherwise reproduce any
particular document, and/or of the use of the images
scanned, printed or otherwise reproduced, you should
consult in advance with your legal advisor for guidance.
• Paper Money
• Travelers Checks
• Money Orders
Food Stamps
•
• Certifi cates of Deposit
• Passports
Postage Stamps (canceled or uncanceled)
•
Immigration Papers
•
• Identifying Badges or Insignias
• Internal Revenue Stamps (canceled or uncanceled)
Selective Service or Draft Papers
•
• Bonds or Other Certifi cates of Indebtedness
• Checks or Drafts Issued by Governmental Agencies
• Stock Certifi cates
Motor Vehicle Licenses and Certifi cates of Title
•
• Copyrighted Works/Works of Art without
Permission of Copyright Owner
Safety-Related Symbols
Power switch: ON position
Power switch: OFF position
Power switch: STAND-BY position
Push-push switch ON
Protective earthing terminal
Dangerous voltage inside. Do not open
covers other than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from
moving parts
CAUTION: An electrical shock may occur.
Remove all the power plugs from the
power outlet.
There are sharp edges. Keep body parts
away from sharp edges.
[NOTE]
Some of symbols shown above may not be
affi xed depending on the product.
v1602_00_en-GB
OFF