Norms And Certifications; Identification - Rating Plate (Rif. 1) - Arneg Panama 2 Manuel D'installation

5. Norms and certifications

All the models of refrigerated cabinets described in this manual for use of the series
Panama 2 meet the essential safety, hygiene, and protection requisties established by
the following European directives and laws:
Machines Directive 2006/42 CE;
harmonized norms applied: EN ISO 14121:2007; EN ISO 12100-1:2005; EN ISO
12100-2:2003
Electromagnetic Compatibility Directive 2004/108/CE;
harmonized norms applied: EN 61000-3-2:2006; EN 61000-3-12:2005; EN 55014-
1:2006; EN 55014-2:1997;
Low Voltage Directive 2006/95/CE;
harmonized norms applied: EN 60335-1:2008; EN 60335-2-89 :2002/A2:2007
European Regulation EC-1935/2004 on materials intended to come into contact with
food products – norm applied: EN 1672-2
They are excluded from the field of application of Directive CEE 97/23 (PED) based on
what established by Article 3, paragraph 3 of the same directive.
A copy of the declaration of product conformity can be requested by filling out the
form present on the internet website: http://www.arneg.it/conformity
The performances of these refrigerated cabinets have been determined by means of a
test conducted in compliance to norm UNI EN ISO 23953-2: 2006 in the environmental
conditions that correspond to climatic class 3 (25 °C , 60% R.U.)
Environmental climatic classes as per UNI EN ISO 23953 - 2
Climatic Class
1
2
3
4
5
6

6. Identification - Rating Plate (Rif. 1)

The serial plate with all the characteristic data is placed on the back of the cabinet:
1) Name and address of the manufacturer
2) Name and length of the cabinet
3) Code of the cabinet
4) Serial number of the cabinet
5) Power supply voltage
6) Power supply frequency
7) Absorbed operating current
8) Operating electrical power absorbed in the refrigeration phase (fans+hot
wires+lighting)
9) Operating electrical power absorbed in the defrosting phase (armored
resistances+hot wires+ fans+lighting)
10) Lighting power (where included)
11) Usable exposition surface
12) Type of refrigerant fluid with which the plant operates
13) Mass of refrigerant gas with which every plant is loaded (only for cabinets that
incorporate a motor)
14) Environmental climatic class and temperature of reference
15) Class of protection against humidity
16) Number of the job order based on which the cabinet has been manufactured
05060117 00 06/05/2011
Dry bulb temp. Relative Humidity
16°C
22
25
30°C
40°C
27°C
Dew point
80%
65%
60%
55%
40%
70%
Panama 2
English
12
15
17
20°C
24°C
21°C
29