Operation; Setting The Operating Mode - Renkforce DL-PAR105 Mode D'emploi

12. Operation

a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected effect
lights synchronously in master-slave operation, or as slave device via the controller of another effect light.
Use the LED display and function buttons MODE, SET UP, UP and DOWN to set the operating modes.
• Push the button MODE repeatedly until the desired function has been selected.
• Confirm the selection with SET UP.
• Select the desired option 2 (if present) with the UP and DOWN buttons.
• Confirm the selection with SET UP.
Overview of the setting options for the operating mode
Display Option
A001-A512 A001-A512
Ch 1-Ch 7
So01-So27 So01-So27
SP01-SP99
AU01-AU15 AU01-AU15
SP01-SP99
FA 0-FA 9 FA 0-FA 9
SP01-SP99
Co01-Co32 Co01-Co32
FS00-FS15
r000-r255 r000-r255
G000-G255
b000-b255
FS00-FS15
Leon-LeoF Leon-LeoF
Led
Iron-IroF
34
Function
DMX start address
DMX operation with 1-7 channels
27 different sound-to-light effects
Effect speed for sound-to-light mode (only at So21-So27)
15 different automatic programmes
Effect speed for automatic mode
10 different fade effects
Effect speed for fade effects
32 pre-programmed colours
Strobe speed (FS00 = Strobe off)
Static colour, brightness red
Static colour, brightness green
Static colour, brightness blue
Strobe speed (FS00 = Strobe off)
Leon = Display always on
LeoF = Display switches off after a brief time
Display reversion
Iron = IR remote control on
IroF = IR remote control off