Nuova Simonelli AURELIA II Manuel D'instructions page 66

Press to return to the previous
page without confirming.
If the delivery time display is on when a
delivery is started - unless with the
Continuous function - the bottom line of the
display will show the delivery time (or times
if more than one unit is delivering).
Each group has an area of the bottom line:
the area on the left is for unit 1; the area
alongside it is for unit 2 and so on, until the
area on the far right, which is for unit 4.
The different areas are separated by vertical
bars; if a group is not delivering, the area is
empty.
Here below is an example: unit 1 is deliver-
ing (it has just started and 0 seconds have
passed); unit 2 has been delivering for 12
seconds and unit 4 is delivering (it has been
delivering for 21 seconds).
Area reserved to the Area reserved to the
delivery time of unit 2 delivery time of unit 3
THURSDAY 12:00
0 I 12 I I 21
Area reserved to the Area reserved to the
delivery time of unit 1 delivery time of unit 4
68
SETTING THE SET POINT PRESS:
The SETPOINT PRESS allows to chose the
pressure/ temperature in the working status.
SETPOINT PRESS
When the key is pressed, the display
will read:
SETPOINT PRESS
XX.XX BAR
Press to adjust the work-
press/temp point.
Press to confirm and pass to the
next step.
Press to return to the previous page
without confirming.
PRESSURE - TEMPERATURE TABLE
AURELIA Digit
Bar °C
0,50 110,5
0,55 111,5
0,60 112,5
0,65 113,5
0,70 114
0,75 115
0,80 115,5
0,85 116,5
0,90 117,5
0,95 118
1,00 119
1,05 119,5
1,10 120,5
1,15 121
1,20 122
1,25 112,5
1,30 123
1,35 124
1,40 124,5
1,45 125
1,50 126
1,55 126,5
1,60 127
HISTORICAL ALARM VISUALISATION
The display will read:
FAULTS HISTORY
By pressing the
read:
ERROR 01
Pressing the
scroll down the ten previous alarms saved in
the memory. After the tenth alarm, by press-
ing the key again you can go on to
the next page.
MAINTENANCE PROGRAMMING
°F
230,9
The display will read:
232,7
MAINTENANCE
234,5
236,3
237,2
239
By pressing the
239,9
read:
241,7
243,5
DELIVE. 10000
244,4
246,2
01 JANUARY 2005
247,1
248,9
249,8 Use the
251,6
values.
252,5
Use the
253,4
Once the set delivery limit or the set main-
255,2
tenance date have been reached, the dis-
256,1
play will visualize the message:
257
MAINTENANCE
258,8
key, the display will
key, allows you to
key, the display will
keys to set both
key to confirm.