Nuova Simonelli AURELIA II Manuel D'instructions page 65

DELIVERY TIME
When the key is pressed, the dis-
play will read:
DELIVERY TIME
XXX
Using the keys, it is possible
to select XXX as:
NOT ACTIVE (pouring times will not be
shown).
ROW 1 (pouring times will be shown in row 1).
ROW 2 (pouring times will be shown in row 2).
Press to confirm and pass to the
next step.
Press to return to the previous page
without confirming.
If the delivery time display is on when a
delivery is started - unless with the
Continuous function - the bottom line of the
display will show the delivery time (or times
if more than one unit is delivering).
Each group has an area of the bottom line:
the area on the left is for unit 1; the area
alongside it is for unit 2 and so on, until the
area on the far right, which is for unit 4.
The different areas are separated by vertical
bars; if a group is not delivering, the area is
empty.
Here below is an example: unit 1 is deliver-
ing (it has just started and 0 seconds have
passed); unit 2 has been delivering for 12
seconds and unit 4 is delivering (it has been
delivering for 21 seconds).
Area reserved to the Area reserved to the
delivery time of unit 2 delivery time of unit 3
THURSDAY
0 I 12 I
Area reserved to the Area reserved to the
delivery time of unit 1 delivery time of unit 4
If the choice of activating the temperature dis-
play on the main page, when the power unit is
switched on or the configuration menu closed, it
is necessary to wait about a second before the
temperatures are displayed. The available tem-
perature information is as follows:
a) One temperature: the current unit tempera-
ture;
b) "LOW": the temperature of the unit is below
70°C;
c) "N.C.": the temperature probe is not con-
nected;
d) "C.C.": the temperature probe has short cir-
cuited.
DELIVERY WHILE WASHING
It is possible to activate or not, the possibility to
quit the menu with the
washing cycle to allow pouring.
When choosing to quit the washing function to
be able to use the units not being washed for
pouring as required, the washing cycle will be
shown in the bottom or top line, depending on
the choices made from the "POURING TIME"
menu. If the pouring times are deactivated, the
washing process will be viewed on the bottom
line.
During an automatic washing cycle, off the
menu (therefore, with pouring enabled), it is not
possible to enter the setting menu to switch off
the machine either in manual or automatic
mode.
The function is opened by pressing the
key.
12:00
Using the
I 21
to select between the NOT ACTIVE / ACTIVE
options.
The
the main menu.
Pressing the
menu and any changes are not saved
PROGRAMMING THE POURING
TIME (Digit version only)
The Aurelia Digit is equipped with an elec-
tronic system to control delivery times
according to the coffee grinding fineness.
The display will read:
When the
play will read:
key during a
Using the
to select XXX as:
NOT ACTIVE (pouring times will not be
shown).
ROW 1 (pouring times will be shown in row 1).
ROW 2 (pouring times will be shown in row 2).
Press
next step.
keys, it is possible
key serves to confirm and return to
key returns to the main
DELIVERY TIME
key is pressed, the dis-
DELIVERY TIME
XXX
keys, it is possible
to confirm and pass to the
67