Speedlink Black Hawk SL-6637 Mode D'emploi page 6

5. Connecting the joystick
D
1. After the driver installation, simply connect the USB socket of
GB
your joystick to the USB port of your computer
2. The joystick is now ready to use.
F
E
6. Programming turbo fire
I
Only buttons 1-8 can be asigned with turbo fire.
1. Hold down the turbo button.
2. Press simultaneously the button to which you wish to
assign turbo function. LED will start flashing.
3. Let go off both buttons to finish programming.
4. If programming has been successful, the LED flashes as soon
as you press the button to which you have assigned turbo fire.
6.1 Reset programming
1. Hold down "Clear" button.
2. Press simultaneously the button from which you want to
delete turbo function.
3. Now the button should function as normal fire button.
7. Notes on use
To test all of the Joystick's functions, do the following:
1. Connect the joystick to the USB port of your PC.
2. In Windows, open "Start/Control panel/System".
3. Double click on "Game controllers" ("Sound, video and game
controllers" under Windows Me) to display a context menu.
4. In the context menu, your joystick should be listed.
5. Click on properties to test operation of the buttons, axes,
throtle and rudder control of the joystick.
6. Click on the "Effects" tab to test the vibration function of your
joystick.
7. If all functions work to your satisfaction, click on "OK" to exit the
menu.
6