Declaration Of Conformity - stayer GAS CUTTER 33 Instructions D'emploi

17 WARRANTY
- This product is warranted for a 12-month period
effective from the date of purchase by the first user.
- This warranty covers all material or production flaws
excluding: batteries, chargers, defective parts subject
to normal wear & tear such as bearings, brushes,
cables, and plugs, or accessories such as drills, drill
bits, saw blades, etc. ; damage or defects resulting
from maltreatment, accidents or alterations; nor the
cost of transportation.
- Damage and/or defects resulting from inappropriate
use also do not fall under the warranty provisions.
- We also disclaim all liability for any bodily injury
resulting from inappropriate use of the tool.
- Repairs may only be carried out by an authorised
customer service centre for STAYER.
- Any transportation costs shall always be borne by the
customer, unless agreed otherwise in writing.
- At the same time, no claim can be made on the warranty
if the damage of the device is the result of negligent
maintenance or overload.
- Definitely excluded from the warranty is damage
resulting from fluid permeation, excessive dust
penetration, intentional damage (on purpose or by gross
carelessness), inappropriate usage (use for purposes
for which the device is not suitable), incompetent
usage (e.g. not following the instructions given in the
manual), inexpert assembly, lightning strike, erroneus
net voltage. This list is not exhaustive.
- Acceptance of claims under warranty can never
lead to the prolongation of the warranty period nor
commencement of a new warranty period in case of a
device replacement.
- Devices or parts which are replaced under the warranty
therefore remain the property of Varo NV.
- We reserve the right to reject a claim whenever the
purchase cannot be verified or when it is clear that
the product has not been properly maintained. (Clean
ventilation slots, carbon brushes serviced regularly,
etc.).
- Your purchase receipt must be kept as proof of date of
purchase.
- Your appliance must be returned undismantled to your
dealer in an acceptably clean state, (in its original blow-
moulded case if applicable to the unit), accompanied
by proof of purchase.
ENGLISH
27
18 ENVIRONMENT
Should your appliance need replacement after extended
use, do not discard it with the household rubbish but
dispose of it in an environmentally safe way. Please
dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take it in a sealed
container to your local service station for reclamation. Do
not throw it in the trash or pour it on the ground.

19 DECLARATION OF CONFORMITY

The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.:+34 91 691 86 30 / Fax: +34 91 691 86 31
CERTIFIES
That the machine:
Type: PETROL BRUSHCUTTER
Models: GAS CUTTER43 - GAS CUTTER33
I declare under our responsibility that the product
described under "Technical Data" is in accordance with
the following standards or standardized documents: ISO
11806-1, EN 61000-4-2, EN 61000-4-3, according to
regulations 2006/42/CE, 2004/108/CE.
Ramiro de la fuente
Managing Director
27
January 5, 2017