Disposal And Recycling; Technical Data; Declaration Of Conformity - stayer ROSE550 Instructions D'emploi

Our customer consultants answer your questions
conceming best buy, application and adjustment of
productsand accessories.
WARRANTY
Warranty card
lncluded in the documentation that accompanies
this equipment, you should find the warranty card.
You should fill out the card completely and retum to
vendar with a copy of purchasing receipt or invoice
and you should receive a receipt.
Note: lf you cannot find the warranty card within
the documentation,you must ask for it through your
supplier.
The warranty is limited only to manufacturing
defects and expire if pieces have been removed or
manipulated or repaired otherthan themanufacturer.

DISPOSAL AND RECYCLING

The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into
household waste! According the European
Guideline 2002/96/ EC for Waste
Electrical and Electronic Equipment and its
implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.
Subject to change wlthout notlce.
5_REGULATIONS

TECHNICAL DATA

= Power
= Drafts in vacuum
Cutting length
Step cutting tooth
= Weight
kg
L = Acoustic power level
wa
L = Sound pressure level
PA
= Vibration
Noise/Vibration Information Sound emission values
determined according to EN 60745-2-15.
Typically the A-weighted noise levels of the product
are: Sound pressure level 74 dB(A); sound power level
95 dB(A).
Uncertainty K =2 dB. Wear hearing protection!
Vibration total values ah (triax vector sum) and
uncertainty K determined according to EN 60745-2-
15: ah <2.5m/s , K=1.5 m/s
2
The vibration level given in this information sheet has
been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly maintained,
the vibration emission may differ. This may
significantly increase the exposure level over the total
vworking period.
An estimation of the level of exposure to vibration
should also
take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
Wear hearlng protectlonl
Use protective gruants.

DECLARATION OF CONFORMITY

The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
We declare under our sole responsibllity that this
product is in confonnity with the following standards
or standardized documents: EN 60745, according to
regulations 2006/42/EC, 2014/30/EU, 2000/14/EC.
Ramiro de la Fuente
Managing Director
January, 2017
/ /
15
.
2
es
it
gb
fr
p