Antenna Assembly - AUtec E16SRXEU1 Manuel De L'utilisateur

6.3 ANTENNA ASSEMBLY

The antenna must only be assembled by qualified technicians.
Install the antenna so that the radio link is facilitated.
The antenna stylus must not be shielded by metal frames and must be at least
50 cm far from metal objects in its surroundings.
The antenna must be installed outside the electrical panel, in a vertical posi-
tion, and possibly place it near the work area.
Example
d > 50 cm
Insert the antenna cable into its appropriate connector on the receiving unit (see photo 1)
and fix the antenna on a metal surface (e.g. electrical panel, bracket...) (see photo 2).
Page 28
R
d
1
antenna
cable
6 - Installation
d
R
d > 50 cm
metal surface
LIE&LQU4-01 - eng.fm
2
antenna
stylus
antenna
cable