6.1 DIN RAIL MOUNTING
Inside an electrical panel, the receiving unit must be installed exclusively on a DIN EN
60 715 rail. Follow instructions below to assembly and disassembly as easily and quickly
as possible.
Page 26
6 INSTALLATION
ASSEMBLY
1. Clip the upper part of the unit on the DIN rail.
2. Use a screwdriver to move downwards the hook on the base of
the unit, until the unit is perfectly fixed to the DIN rail.
DISASSEMBLY
Use a screwdriver to move downwards the hook on the base of
the unit, until the unit unhooks from the DIN rail.
6 - Installation
LIE&LQU4-01 - eng.fm