Documentation; Certificate Of Guarantee; Technical Data Sheet - AUtec E16SRXEU1 Manuel De L'utilisateur

As required by the Machines Directive and the related harmonised standards, all machines
must undergo a risk analysis: it is therefore necessary to evaluate, within the limits of this
analysis, if the machine can be radio remote controlled.
The machine producer and/or the person who decides upon radio remote control use and
installation is responsible for this analysis.
Autec cannot be held responsible if the risk analysis is not carried out correctly.
To guarantee correct radio remote control operation, all current regulations regarding safety
at work and accident prevention should be respected. All applicable standards and regula-
tions valid in the user country regarding the use of both the machine and the radio remote
control must always be respected.
Autec cannot be held responsible if the radio remote control is used in unlawful
working conditions.
In case of malfunction and/or emergency, disable the system "machine+radio
remote control" until the problem has completely been solved.
Any damaged part can ONLY be replaced by authorised Autec personnel, and ONLY
using original Autec spare parts.

2.2 DOCUMENTATION

Documentation enclosed with each radio remote control includes at least the following:
- transmitting unit manual
- receiving unit manual
- battery charger manual
- EC Declaration of Conformity

- certificate of guarantee

- technical data sheet

- enclosure "Limitations & Authorisations".
Make sure that such documents have been supplied: if they are not, please ask them
to Autec specifying the product serial number.
Certificate of guarantee
Guarantee terms and conditions for the radio remote control are stated in the "Certificate of
guarantee".
Technical data sheet
The technical data sheet shows the wiring diagram between the receiving unit and the ma-
chine. The technical data sheet must be filled in and checked by the installer, who is re-
sponsible for a correct wiring. Once all necessary checks have been carried out, the
installer must undersign the technical data sheet, which must be kept with the user's man-
ual (always keep a copy of this data sheet for administrative purposes).
LIE&LQU4-01 - eng.fm 2 - Introduction Page 19