Receiving Unit; Extension Unit - AUtec E16SRXEU1 Manuel De L'utilisateur

The receiving unit Type R102 can be used with the transmitting units of the following series:
- E16 SERIES
- MODULAR SERIES
- LIGHT SERIES

3.1 RECEIVING UNIT

E
F3
F1 F2
A
These receiving units are equipped with a safety function called SAFETY that pro-
tects the system "machine+radio remote control", when it is in neutral (rest) posi-
tion, from unintended movements caused by possible radio remote control faults.
For this to happen, both the wiring instructions in the technical data sheet and the
prescriptions for correct installation included in the following manual have to be re-
spected.
POWER THE RECEIVING UNIT WITH A SAFETY ISOLATING TRANSFORMER
(see EN 60204-32 Paragraph 6.4).

3.2 EXTENSION UNIT

It is also possible to use an extension for the receiving unit, which adds other 6 commands
to those on the base unit.
LIE&LQU4-01 - eng.fm
3 RECEIVING UNIT
D
B
C G
D
extension unit
G
3 - Receiving unit
A light signals
B technical data plate
C identification plate
D output terminal block
E power supply terminal block
F1/F2
fuses
F3
G antenna connector
F4
output terminal
D
F4
connection flat
G
block
fuse
cable
Page 21