Care must also be taken to prevent risks to persons and things as summarised below:
• Avoid damage to the machine assembly, commands and brush, during transport and handling before installation.
• Install the machine in well-ventilated spaces and far from sources of electromagnetic pollution.
• Train all staff how to use the machine and carry out maintenance
Risks for the animals:
Thanks to its electronic control, the cattle brushing machine is safe for the animals.
The aspects characterising this safety are:
• Motor force control
• The motor's maximum tractive force is programmed to control any critical situations for the animal such as, for
example, the tail becoming trapped in the roller.
• Inversion of rotation when meeting resistance in the presence of an obstacle
If the maximum force is exceeded, the brush inverts direction and rotates in the opposite sense for 1 minute, after
which it returns to rest position.
Warning: The length of fi nal part of the tail of animal should no excess 5-10 cm.
PRODUCTION OF NOISE:
Not signifi cant in the working area.
WARRANTY:
The warranty has the duration of 12 months from the date on which the machine is delivered and covers the repair
and/or replacement of faulty parts due to defective materials or construction: excluded are, however, the labour
costs sustained by the assistance service in replacing faulty parts and for travel and accommodation when visiting
customers for this purpose.
Replacement or repairs will be made in the shortest time possible, compatibly with the manufacturer's engage-
ments and those of staff, without any obligation to compensate and/or refund direct or indirect damages.
The warranty does not cover any faults due to transport not effected with Kerbl vehicles, due to bad or incorrect
connections or connection to insuffi cient electric systems, to neglect or incapable use, tampering by unauthorised
staff or in any way due to causes not depending on Kerbl.
The warranty is automatically cancelled if the machine is used for purposes other than those for which it is desti-
ned, when non-original spare parts are used or when modifi cations are made without written consent by Kerbl.
Transport costs and risks for repairs are charged totally to the user. It is also agreed that Kerbl shall not be liable for
any direct or indirect damage caused to persons or things by machine faults and failures or consequent to forced
suspension of use of the same.
29