Troubleshooting - Quickie M6 Mode D'emploi

E N G L I S H
You will need to adjust your chair from time to time for best performance (especially if you alter the
original settings). This chart gives you a first solution, then a second and a third if needed. You may
need to look farther to find the best solution for a specific problem.
NOTE– To keep track of your progress, make only ONE change at a time.
   
  
 

  
 
930457 Rev. C
Solution
Make sure tire pressure is correct and equal in both
rear tires and front caster tires, if pneumatic.

Make sure all nuts and bolts are snug.
Make sure all spokes and nipples are tight on
radial spoke wheels.
Use Tri-Flow Lubricant (Teflon®-based) between
all modular frame connections and parts.

Check for proper caster fork adjustment.
See instructions for caster fork adjustment.

Make sure both front casters touch the ground
simultaneously. Make sure you check for this problem
on a flat surface. See Dealer.
16
X. TROUBLESHOOTING