HemoCue Albumin 201 Manuel D'utilisation page 52

Warning
The device is tested according to standard IEC 60601-1
and IEC 60601 and is found to comply with the standard.
Despite this compliance it is impossible to predict any
possible effects by other near by standing analyzer
or the possible impact of electromagnetic radiance. This
is the reason we need to inform users of this analyzer
that disturbance from other equipment might affect the
performance of the analyzer. Should you note that this is
the fact, please contact your local HemoCue distributor.
The HemoCue Albumin 201 Analyzer is intended for
use in the electromagnetic environment specified in
Technical specifications. The customer or user of the
HemoCue Albumin 201 Analyzer should assure that it is
used in such an environment. The HemoCue Albumin 201
Analyzer uses RF energy only for its internal function.
Therefore, its RF emissions are very low and not likely to
cause any interference in nearby electronic equipment.
The HemoCue Albumin 201 Analyzer is suitable for use in
all establishments, including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes.
Accessories connected to analog and digital ports must
be certified according to IEC 60601-1. All configurations
must comply to the IEC 60601-1-1. Further connection
to in or output are considered "configuring a medical
system", and must comply with IEC 60601-1-1.
For further information, please see Technical Specifica-
tions or contact your local HemoCue distributor.
52