Warranty; Declaration Of Conformity - Okay FGS 80-1 LI Manuel D'utilisation

GB | Operating Instruction

Warranty

For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 60 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to 12
months. Wearing parts, rechargeable batteries and
defects caused by the use of non fitting accessories,
repair with parts that are not original parts of the manu-
facturer, use of force, strokes and breaking as well as
mischievous overloading of the motor are excluded from
this warranty. Warranty replacement does only include
defective parts, not complete devices. Warranty repair
shall exclusively be carried out by authorized service
partners or by the company's customer service. In the
case of any intervention of not authorized personnel, the
warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
EC Declaration of Conformity
We, ikra GmbH, Schlesierstrasse 36, 64839 Münster,
Germany, declare under our sole responsibility that the
product/s Cordless Grass shear FGS 80-1 LI, to which
this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/
EC (Machinery Directive), 2014/30/EU (EMC-Guideline),
2011/65/EU (RoHS-Guideline), only charger 2014/35/
EU (Low Voltage Guideline) and 2000/14/EC+2005/88/
EC (noise directive) incl. modifications. For the relevant
implementation of the safety and health requirements
mentioned in the Directives, the following standards and/
or technical specification(s) have been respected:
EN 60745-1:2009/A11:2010
EN 60745-2-15:2009/A1:2010
EN 50581:2012
AfPS GS 2014:01 PAK
EN 55014-1:2006/A1:2009/A2:2011
EN 55014-2:2015
Only charger:
EN 60335-2-29:2004+A2:2010
EN 60335-1:2012+A11:2014; EN 62233:2008
EN 55014-1:2006/+A1+A2; EN 55014-2:2015
EN 61000-3-2:2014; EN 61000-3-3:2013
AfPS GS 2014:01 PAK
The year of manufacture is printed on the nameplate and can be
additionally retrieved via the consecutive serial number.
Münster, 16.08.2019
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Matthias Fiedler,
Schlesierstrasse 36, 64839 Münster, Germany
35