Dell PowerEdge T630 Manuel Du Propriétaire page 49

NOTE: You cannot delete or change an existing System or Setup password if the Password Status is
Locked.
Steps
1. To enter System Setup, press F2 immediately after a turning on or restart.
2. From the System Setup Main Menu, select System BIOS and press Enter.
3. On the System BIOS Screen, select System Security and press Enter.
4. On the System Security screen, verify that Password Status is Unlocked.
5. Select System Password, alter or delete the existing system password and press Enter or Tab.
6. Select Setup Password, alter or delete the existing setup password and press Enter or Tab.
If you change the System and Setup password a message prompts you to re-enter the new
password. If you delete the System and Setup password, a message prompts you to confirm the
deletion.
7. Press Esc to return to the System BIOS screen. Press Esc again, and a message prompts you to save
the changes.
49