Miscellaneous Settings Screen - Dell PowerEdge T630 Manuel Du Propriétaire

Élément de menu
Platform Key
Key Exchange Key Database
Authorized Signature Database
Forbidden Signature Database

Miscellaneous Settings screen

You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset
tag, and changing the system date and time.
To view the Miscellaneous Settings screen, click System Setup Main Menu → System BIOS →
Miscellaneous Settings. The Miscellaneous Settings screen details are explained as follows:
Menu Item
System Time
System Date
Asset Tag
Keyboard NumLock
F1/F2 Prompt on Error
Load Legacy Video Option ROM
In-System Characterization
Description
Permet d'importer, d'exporter, de supprimer ou de
restaurer la clé PK (Platform Key).
Permet d'importer, d'exporter, de supprimer ou de
restaurer des entrées dans la base de données KEK
(Key Exchange Key).
Permet d'importer, d'exporter, de supprimer ou de
restaurer des entrées dans la base de données db
(Authorized Signature Database).
Permet d'importer, d'exporter, de supprimer ou de
restaurer des entrées dans la base de données dbx
(Forbidden Signature Database).
Description
Enables you to set the time on the system.
Enables you to set the date on the system.
Displays the asset tag and enables you to modify it
for security and tracking purposes.
Enables you to set whether the system boots with
the NumLock enabled or disabled. By default, the
Keyboard NumLock is set to On.
NOTE: This option does not apply to 84-key
keyboards.
Enables or disables the F1/F2 prompt on error. By
default, F1/F2 Prompt on Error is set to Enabled.
The F1/F2 prompt also includes keyboard errors.
Enables you to determine whether the system
BIOS loads the legacy video (INT 10H) option ROM
from the video controller. Selecting Enabled in the
operating system does not support UEFI video
output standards. This field is available only for
UEFI boot mode. You cannot set this to Enabled if
UEFI Secure Boot mode is enabled.
This option enables or disables In-System
Characterization. By default, In-System
Characterization is set to Disabled. The two other
options are Enabled and Enabled - No Reboot.
45