Packaging - Weight; Standard Equipment; Max. Dimensions; Verpackung - Gewicht - Riello Burners RL 250 Manuel D'entretien

970 t
Table des Matières

Publicité

VERPACKUNG - GEWICHT (A)
werte
Der Brenner steht auf einem besonders für-
die Handhabung mit Hubwagen geeignetem
Holzrahmen. Die Außenabmessungen der Ver-
packung sind in Tabelle (A) aufgeführt.
Das Gesamtgewicht des Brenners ein-
schließlich Verpackung wird aus
ersichtlich.

AUSSTATUNG

1 - Wärmeschild
4 - Schrauben für die Befestigung des Bren-
nerflanschs am Kessel: M 16 x 40
1 - Anleitung
1 - ErsatzteileKatalog
ABMESSUNGEN (B)
- Richtwerte
Die Brennerabmessungen sind in der Abb. (B)
angeführt. Zur Inspektion des Flammkopfes
muß der Brenner geöffnet werden, indem der
hintere Teil auf den Zapfen zurück bewegt wird.
Die Gesamtabmessungen des offenen Bren-
ners sind unter dem Wert M angegeben.
PACKAGING - WEIGHT (A)
- Richt-
measurements
The burner stands on a wooden base which
can be lifted by fork-lifts. Outer dimensions of
packaging are indicated in (A).
The weight of the burner complete with pack-
aging is indicated in Table (A).
Tabelle (A)

STANDARD EQUIPMENT

1 - Thermal insulation screen
4 - Screws to secure the burner flange to the
boiler: M 16 x 40
1 - Instruction booklet
1 - Spare parts list
MAX. DIMENSIONS (B)
measurements
The maximum dimensions of the burner are
given in (B). Bear in mind that inspection of the
combustion head requires the burner to be
opened by pulling the rear part back on the piv-
ots.
The overall dimensions of the burner when open
are indicated by M.
EMBALLAGE - POIDS (A)
- Approximate
tives
être soulevée par des chariots transpalettes.
Les dimensions d'encombrement de l'embal-
lage sont reportées dans le tableau (A).
indiqué dans le tab. (A).

EQUIPEMENT STANDARD

1 - Ecran thermique
4 - Vis pour fixer la bride du brûleur à la chau-
1 - Instructions
1 - Catalogue pièces détachées
- Approximate
ENCOMBREMENT (B)
L'encombrement du brûleur est indiqué sur la
fig. (B). Attention: pour contrôler la tête de com-
bustion, ouvrir le brûleur en faisant reculer
l'arrière sur les pivots.
L'encombrement du brûleur ouvert est indiqué
par la dimension M.
15
- Mesures indica-
Le brûleur est placé sur une palette qui peut
Le poids du brûleur avec son emballage est
dière: M 16 x 40
- Mesures indicatives

Publicité

Table des Matières
loading

Table des Matières