Tanning; Preparation Time - ergoline Open Sun 550 A.R.T. Turbo Power Instructions De Service

Tanning

Start of tanning
The device is started automatically with an internal or external timer.
Note:
Timer instructions: see separate manual.

Preparation time

Before the UV lamps go on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time
by pressing the START/STOP button.
WARNING! Fire hazard!
There is a risk of setting fire to your hair or burning your skin.
– Set all objects away from the facial tanners before start-
WARNING!
ing the treatment. It is particularly important not to place
towels or long hair on top of the equipment.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective
goggles.
– Put on the protective goggles.
– Lie down on the bed surface.
– Close the canopy.
24
– Press the START/STOP button and follow the instructions of the
Voice Guide.
...