Preparation; Assembly/Adjusting The Length; Fastening - Maxx-world SK209 Mode D'emploi

Preparation

ATTENTION!
❐ Keep children and animals away from the packaging material. Danger of suffocation
exists!
❐ Set up the article in a suitable area with adequate space on all sides.
• Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and check for any damages from transport. If you identify dam-
ages to the components, do not use them (!), instead contact our customer service
centre.
• Assemble the product and adjust the length as desired (see section "Assembly/ad-
justing the length").
• Fasten the product to a suitable location (see section "Fastening").

Assembly/adjusting the length

Depending on your body size and the workout exercise, you will need to set the fi tness
article to different lengths.
1. Use the triglides (G) to adjust the two length-adjustable straps (A) to the same length.
Then use the adjusting loop (B) to pull them so that they are smooth. Make sure that
you pull the adjusting loop up to the D rings and no further.
2. Use the snap hooks to attach the cord strap (F) to one loop of a length-adjustable
strap.
3. Use the snap hook to attach one handle (E) to a D-ring of a length-adjustable strap.
In the process, you can select each of the three D rings depending on the desired
length.
4. If necessary, use the snap hook to mount the door anchor (D) on the loop of the cord
strap.

Fastening

ATTENTION!
❐ Parents and other guardians should always be aware of their responsibility to an-
ticipate situations and actions arising from children's natural inclination to play and
experiment for which the fi tness article is not designed.
❐ Ensure that there is enough space on all sides of the article (at least 3 metre) so that
you have enough room for movement when working out.
To use the fi tness article, you must attach it to a suitable point. Make sure that it is high
and stable enough to hold you. There are various possibilities for this:
15