Bosch HDS8655U Manuel D'utilisation page 17

Insert the rack.
2.
Tilt the rack up to allow the stop to slide onto the rack
3.
guide.
Bring the rack to a horizontal position and push it in the
4.
rest of the way.
The rack should be straight and level.
Removing the flat rack from the oven
Grasp the rack firmly on both sides and pull it toward
1.
you.
When the stop is reached, tilt the rack up and pull it out
2.
fully.
Telescopic rail
WARNING
The telescopic rails become hot when the appliance is in
use.
You must take great care to avoid burning yourself
▶
when they are pulled out.
The telescopic rails allow you to pull accessories out com-
pletely. When inserting the baking tray or roasting shelf,
ensure that it locks into place in front of the tab on the tele-
scopic rails.
Inserting the telescopic rail into the oven
CAUTION
To avoid possible injury or damage to the appliance, en-
sure the telescopic rail is installed exactly per installation
instructions and not backwards or upside down.
Hang the upper part of the rail onto the rack guide.
1.
Clip the lower part of the rail onto the rack guide.
2.
Slide the movable part of the telescopic rail in and out a
3.
few times to make sure it is able to move freely and that
the stationary part of the telescopic rail is securely an-
chored.
Accessories en-us
17