Siemens SINUMERIK 840D sl Manuel De Mise En Service page 556

Configuration du système
2.3 Fichier de configuration "basesys.ini"
; If there is only one Ethernet interface, it's used by default as
; an external(company) network. Alternatively, usage as automation
; net (TCU boot support etc.) is possible by setting NetworkModel
; to "automation". (Only NCU, Service and PCU20A variants!)
;NetworkModel=automation
; DisableSubsystems can be used to skip certain CFSes (= subsystems)
; a list of multiple names (separated by spaces) is possible
; a simple name means all CFSes with this name, an absolute path
; (e.g., /siemens/sinumerik/nck) exactly this one CFS
; with the special value "ALL", all subsystems can be disabled
;DisableSubsystems=nck
; Directory for OEM netboot files (served by tftp to diskless
clients)
NetbootDirectory=/oem/common/netboot
; Properties of local time zone: names, offset, start and end day
; Some examples:
; Europe: WET0WEST,M3.5.0,M10.5.0
;
;
; USA:
;
;
;
; China:
; Japan:
Timezone=UTC
; If DisablePLCTimeSync is set, no time synchronization
; with PLC will happen.
;DisablePLCTimeSync=1
; Set to 1 to enable coredumps in /var/tmp
EnableCoreDumps=0
26
CET-1CEST,M3.5.0,M10.5.0
EET-2EEST,M3.5.0,M10.5.0
EST5EDT,M4.1.0,M10.5.0
CST6CDT,M4.1.0,M10.5.0
MST7MDT,M4.1.0,M10.5.0
PST8PDT,M4.1.0,M10.5.0
CST-8
JST-9
Système d'exploitation NCU (IM7)
Manuel de mise en service, 03/2009, 6FC5397-1DP10-4DA0