Siemens SINUMERIK 840D sl Manuel De Mise En Service page 554

Configuration du système
2.3 Fichier de configuration "basesys.ini"
;InternalIP=192.168.214.1
;InternalNetMask=255.255.255.0
; These two can define an alias IP for X120.
;InternalIP_Alias=192.168.216.1
;InternalNetMask_Alias=255.255.255.0
; This defines a "name of station" for ProfiNet (ERTEC interface),
; e.g. for DCP. If not defined or empty, the usual hostname is also
; the PN name.
;PN_StationName="PN_IO"
; Setting EnableDHCPD_SysNet to 0 suppresses that a DHCP server
; is started on that interface
;EnableDHCPD_SysNet=0
; Set synchronization of all DHCP servers in the system/TCU network
; (X120). Possible values are:
; OFF, ON_LOW (low priority),
; ON or ON_HIGH (normal priority), or ON_MASTER (highest priority).
; ON_MASTER is used to make this machine deterministically
; the DHCP master server, but should be used only for one server
; in the network.
;SyncModeDHCPD_SysNet=ON
; This is the range of dynamic IPs given out by the DHCP server
; Defaults should be sensible
InternalDynRangeStart=192.168.214.10
InternalDynRangeEnd=192.168.214.239
; If once a DHCP master was seen, the DHCP server waits this many
; seconds for the master to show up before trying to become the
; active server.
;DHCPDNoMasterWait=120
; DNS domain name used for names in system/TCU network
; (default is "local" to conform with RFC)
InternalDNSDomain=local
; FixedDomain and FixedNameservers can be used to define a DNS
; domain and nameservers, if the DHCP/DNS server on system network
; is disabled.
;FixedDomain=local
;FixedNameservers=192.168.214.1
24
Système d'exploitation NCU (IM7)
Manuel de mise en service, 03/2009, 6FC5397-1DP10-4DA0