Honda HHH25D Manuel De L'utilisateur page 63

Engine
Engine model
Engine description code
Engine type
Displacement
Bore × Stroke
Engine Net Power
(in accordance with
SAE J1349*)
Engine Max. Net Torque
(in accordance with
SAE J1349*)
Cooling system
Ignition system
Oil capacity
Fuel tank capacity
Spark plug
Carbon dioxide (CO2)
emissions**
* The power rating of the engine indicated in this document is the net power output
tested on a production engine for the engine model and measured in accordance
with SAE J1349 at 7,000
Torque). Mass production engines may vary from this value.
Actual power output for the engine installed in the final machine will vary
depending on numerous factors, including the operating speed of the engine in
application, environmental conditions, maintenance, and other variables.
** The CO2 measurement results from testing over a fixed test cycle under laboratory
conditions a(n) (parent) engine representative of the engine type (engine family) and
shall not imply or express any guarantee of the performance of a particular engine.
Tune up
ITEM
Spark plug gap
Valve clearance (cold)
Other specifications
Specifications are subject to change without notice.
60
4-stroke, overhead camshaft, 1 cylinder
35.0 × 26.0 mm (1.38 × 1.02 in)
0.72 kW (1.0 PS)/7,000 min
1.0 N·m (0.10 kgf·m, 0.74 lbf·ft)/5,000 min
0.08 L (0.08 US qt, 0.07 Imp qt)
0.45 L (0.119 US gal, 0.099 Imp gal)
Please refer to "CO2 Information List" on
www.honda-engines-eu.com/co2
-1
(Engine Net Power) and at 5,000
min
SPECIFICATION
0.6 – 0.7 mm
(0.024 – 0.028 in)
IN: 0.08 ± 0.02 mm
EX: 0.11 ± 0.02 mm
No other adjustment needed.
GX25T
GCALT
3
25.0 cm (1.53 cu-in)
Forced air
Transistorized magneto
NGK: CMR5H
MAINTENANCE
Refer to page: 49
See your servicing dealer
-1
-1
-1
(Engine Net
min