MZ electronic EV-040 Instructions D'utilisation page 23

This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Exit
To return to the settings menu.
Settings menu
Use the (DOWN) or
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Light
By enabling this function it is possible to start
the display luminous intensity programming
procedure.
Turnoff Time
This function allows the user to set the turnoff
time after the last command given (default
value 30 seconds).
Exit
To return to the settings menu.
EV-040
Confirm with
Confirm with
Settings
C o n t r a s t
L i g h t
T u r n o f f T i m e
E x i t
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Confirm with
= Yes = No
3 0
23
English
Rev. 11 – 2018