ProBreeze PB-06 Mode D'emploi page 8

CONNECTING THE WATER HOSE FOR CONTINUOUS DRAINING
For long-term use, it is recommended to connect a
hose for continuous drainage. To attach the hose:
1. Remove the plug from the water hose
connector located on the back of the
dehumidifier.
2. Insert the hose into the water hose
connector and check it is connected
properly.
3. Ensure the hose end has a suitable
drainage outlet (e.g. a drain or bucket).
REMOVING AND EMPTYING THE WATER TANK
When the water tank is full 10 beeps will sound; the
Water Tank Full indicator light will illuminate, and
the dehumidifier will pause operation to prevent the
water tank from overflowing. To remove and empty
the water tank:
1. Turn off the dehumidifier and
unplug it from the wall socket.
2. Gently pull the water tank out from
the front of the dehumidifier.
3. Empty the water tank.
4. Once empty, slot the tank back in
carefully.
7 | English