Wake The Nas From Power Saving Mode; Ups Management - Seagate NAS OS 4 Manuel D'utilisation

1. Click the slider for Power saving mode to enable the schedule.
2. Set the time of day that the NAS will wake from power saving mode. Click on the day of the week in the
Power on column.
3. In the pop-up window, choose the radio button next to Scheduled and set the time.
4. Choose Save.
5. Set the time of day that the NAS will enter power saving mode. Click on the day of the week in the
Power off column.
6. In the pop-up window, choose the radio button next to Scheduled and set the time.
7. Choose Save.

Wake the NAS from power saving mode

To wake the NAS from power saving mode, apply a short press to the power button. You can also use the
Wake on LAN function in Seagate Network Assistant (see

UPS management

NAS OS supports three types of UPS (uninterruptible power source) management:
Single NAS device: Direct connection to a UPS
Multiple NAS devices A: One NAS OS device takes the role of Network UPS server
Multiple NAS devices B: The UPS connects directly to the router and acts as the Network UPS server
Seagate NAS OS 4
Wake on LAN (WOL)).
6/1/20 92