Security; Auto Block - Seagate NAS OS 4 Manuel D'utilisation

the documentation for your UPS to learn more on how to manage the device.
Remove the network UPS server
Choose Remove the network server to disconnect a NAS from the network UPS server.

Security

Use the Security tab to prevent potential attackers from reaching your NAS OS device. You can also control
access to your NAS OS device using Ban and White lists.

Auto Block

Enable auto block to block IP addresses that have made numerous failed attempts to log into the device and
automatically add them to the Ban list. IP addresses on the ban list are prevented from accessing your NAS
OS device.
Click the switch to enable auto block. See below for the default settings for auto block:
Maximum failed logins: 3
Failed logins within (minutes): 2
Block for (minutes): 2
The settings can be changed when auto block is enabled.
To prevent users from losing access due to failed logins, add their IP addresses to the Whitelist. Click
Whitelist and then enter the IP addresses.
Auto block is optimized for FTP and SSH protocols. You can manage the ban list by clicking Ban list and
manually entering or removing IP addresses.
Cer ficate
Seagate NAS OS 4 6/1/20 96