Table des Matières
Publicité
log of events is available for download by choosing Download System Log.
To purge all events from the log list, choose Clear logs.
SNMP tab
Administrators with advanced networks that include SNMP can add the NAS OS device as an agent. NAS OS
supports SNMP versions v1/v2 and, for enhanced security, v3.
Turn on the SNMP agent by clicking on its slider. To make changes to the SNMP configuration, pass the cursor
over a setting and click on it.
Storage
The information below identifies and explains the functions on the Storage page. For directions on how to
configure RAID for your NAS OS device, go to RAID.
NAS OS volume and RAID management
NAS OS supports multiple volumes, each with its own level of RAID. The maximum number of supported
volumes depends upon the amount of disks in the NAS's enclosure. For example, a NAS OS device with
eight hard drives can have up to eight volumes.
Enhanced data protec on: NAS OS SimplyRAID
No matter the capacity of your hard drives, NAS OS SimplyRAID will prepare the storage for immediate use
as well as future expansion. SimplyRAID allows you to:
Install disks of varying capacities
Replace smaller capacity hard drives with larger capacity hard drives
Upgrade storage capacity without deleting or moving data
Protect data without compromising performance
When using hard drives of varying capacities, SimplyRAID will attempt to optimize available storage for your
data.
Standard disk configura on: Manual RAID
While the benefits of SimplyRAID are highly recommended, the Storage page also gives you the option to
manually configure your hard disks as:
JBOD
Seagate NAS OS 4
6/1/20
104
Publicité
Table des Matières
Dépannage
