Single Nas: Direct Co Nnectio N - Seagate NAS OS 4 Manuel D'utilisation

Important info: Seagate cannot guarantee that all UPS devices are compatible with NAS OS UPS

management.
Important info: Make certain to review the UPS's documentation before connecting it to your

NAS devices.
Single NAS: Direct connec on
Follow the directions below when connecting a single NAS OS device to a UPS.
1. Confirm that no one is accessing the NAS OS device and power it off.
2. Connect the NAS to a supported UPS via power and USB cables. The USB cable is required for the UPS
management information.
3. Power on the NAS and go to the Power page. The UPS should appear in the UPS management section.
Battery threshold level refers to the percentage of power available to the UPS's battery. In the event that a
working environment loses power, the NAS automatically powers off when the UPS reaches the threshold
level. Without the UPS's threshold level, power is suddenly cut off to the NAS, potentially causing the loss
and corruption of data.
The administrator can adjust the threshold by clicking on the pencil icon.
Mul ple NAS devices A: A NAS OS device is the network UPS
Seagate NAS OS 4 6/1/20 93