Intended Use - DeWalt DWS520 Guide D'utilisation

FIG. 1 M A
L
H
K
G
F
E
X
D
J
H
S
U
B
C
Z

INTENDED USE

The DWS520 track saw is designed to cut wood. Do not use this
J
saw to cut solid-surface countertops (i.e., Corian®).
use this saw to cut solid-surface countertops. Material build-up
may inhibit proper function of the plunge return, leaving the blade
exposed.
ADJUSTMENTS AND SET-UP
disconnect it from power source before installing and removing
I
accessories, before adjusting or when making repairs. An
accidental start-up can cause injury.
functions are working properly!
Bevel Adjustment (Fig. 1)
E
The bevel angle can be adjusted between 0° and 47°.
7
FIG. 2
M
L
WARNING: To reduce the risk of serious personal injury, do not
WARNING: To reduce the risk of injury, turn unit off and
WARNING: Before using the track saw, ALWAYS make sure all
1. Loosen the bevel adjustment knobs (E).