Battery Type; Intended Use - DeWalt DCS777 Mode D'emploi

EnGLIsh

Battery Type

The DCS777 operates on a 54 volt battery pack.
These battery packs may be used: DCB546. Refer to Technical Data for
more information.
Package Contents
The package contains:
1 Partly assembled machine
2 hex key (4 mm and 6 mm)
1 216 mm TCT saw blade
1 Material clamp
2 Battery packs (T2 model)
1 Charger (T2 model)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior
to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Carrying point
Date Code Position (Fig. B)
The Date Code 57 , which also includes the year of manufacture, is printed
into the housing.
Example:
2016 XX XX
Description (Fig. A–C, E)

WARNING: Never modify the power tool or any part of it. Damage or
personal injury could result.
1 On/off switch
Guard lock up release lever
2
Carrying handle
3
Fixed upper guard
4
5 Outer flange
Blade bolt
6
Lower blade guard
7
Saw blade
8
Sliding fence lock knob
9
Fixed table
10
Kerf plate
11
Mitre arm
12
Mitre latch
13
Rotating table/mitre arm
14
Mitre scale
15
Sliding fence
16
32
17 Material clamp
Traverse lock
18
Guard lock up hook
19
Bevel clamp handle
20
21 Bevel scale
Bench mounting holes
22
Lock down button
23
Traverse bars
24
Saw head
25
Hex keys
26
Battery pack
27
Battery pack release button
28
Fuel gauge button
29
Lock off switch
30
Override button
31
Carrying handle (left and right)
32
Inner flange (Fig. E)
33
Dust extraction port
34

Intended Use

Your D WALT Cordless Compact Mitre Saw has been designed for
e
professional cutting wood, wood products, aluminum and plastics. It
performs the sawing operations of cross-cutting, bevelling and mitring
easily, accurately and safely.
This unit is designed for use with a nominal blade diameter 216 mm carbide
tip blade.
DO nOT use under wet conditions or in presence of flammable liquids
or gases.
These miter saws are professional power tools.
DO nOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.

WARNING! Do not use the machine for purposes other than intended.
• Young children and the infirm. This appliance is not intended for use
by young children or infirm persons without supervision.
• This product is not intended for use by persons (including children)
suffering from diminished physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are supervised by a person
responsible for their safety. Children should never be left alone with
this product.
ASSEMBLY

WARNING: To reduce the risk of serious personal injury, turn
machine off and disconnect battery pack before making any
adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.

WARNING: Use only D WALT battery packs and chargers.
e
Unpacking
The motor and guards are already assembled onto the base.
Inserting and Removing the Battery Pack from the
Tool (Fig. A–C)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
1. Align the battery pack 27 with the rails inside the tool's handle (Fig. A).
2. Slide it into the handle until the battery pack is firmly seated in the tool
and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button 28 and firmly pull the battery pack out of the
tool handle.
2. Insert battery pack into the charger as described in the charger section
of this manual.
Fuel Gauge Battery Packs (Fig. C)
Some D WALT battery packs include a fuel gauge which consists of
e
three green LED lights that indicate the level of charge remaining in the
battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button
combination of the three green LED lights will illuminate designating the
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need to
be recharged.
nOTE: The fuel gauge is only an indication of the charge left on the battery
pack. It does not indicate tool functionality and is subject to variation based
on product components, temperature and end-user application.
XPS Button
35
27 is fully charged.
29 . A