turck PS400 Série Mode D'emploi page 44

12 Typical curves of the analogue outputs
Current output
4...20 mA
I [ mA ]
20
4
–1 0 ASP
Within the defined measuring range between ASP (analogue start point)
and AEP (analogue end point), the output signal is between 4 and 20 mA
or alternatively between 0 and 20 mA. The ex-factory setting of the
measuring range is between 0 and MEW (measuring range end value)
and the default output signal is between 4 mA (ASP) and 20 mA (AEP).
Voltage output
0...5 V or 0...10 V
U [ V ]
5 bzw.10
–1 0 ASP
Within the defined measuring range between ASP (analogue start point)
and AEP (analogue end point), the output signal is between 0 and 10 V
or alternatively between 0 and 5 or 1...6 V. The ex-factory setting of the
measuring range is between 0 and MEW (measuring range end value)
and the default output signal is between 0 V (ASP) and 10 V (AEP).
Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com
AEP MEW P
AEP MEW P
0...20 mA
I [ mA ]
20
0 ASP AEP
–1
1...6 V
U [ V ]
6
1
–1 0 ASP AEP
MEW P
MEW P
19
/0805