turck PS400 Série Mode D'emploi page 39

Pressure Sensor Series PS400/PS500
10.2 Sensor with one switching output and one analogue output
Parameter Explanation
Loc Inhibiting/locking
the programming
mode
ULoc Enabling/unlocking
Unit Display unit
SP Switch point
rP Release point
OUSP Function of the
switching output
ASP Starting point of the
analogue output
14
/0805 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com
Options Function
Programming mode is
completely inhibited.
Programming mode is
enabled (default).
bar bar (LED green)
psi psi (LED green)
kPa kPa (LED green)
MPa MPa (LED green)
Upper limit value at
which the switching
output changes its
switching status
Lower limit value at
which the switching
output changes its
switching status
Hno Hysteresis function (N/O
= normally open)
Hnc Hysteresis function (N/C
= normally closed)
Fno Window function (N/O
= normally open)
Fnc Window function (N/C
= normally closed)
Pressure value at which
the analogue output has
its starting point. It is set
via the "Mode" and "Set"
button.