Operating Modes; Programming - turck PS400 Série Mode D'emploi

Pressure Sensor Series PS400/PS500

8 Operating modes

Run mode – Standard operation
The sensor detects the system pressure and acts in accordance to the
required switching or analogue performance, meeting the ex-factory or
customer-specific parameters. The display indicates the applying system
pressure, the selected unit of pressure and the status of the switching
outputs.
Menu mode - Parameters and associated values
Upon a push of the mode button, the display assumes the menu mode.
In this mode all parameters and the associated values can be read. To
view the values associated with a parameter, simply press the "Set"
button for a short moment. The adjustment options can be taken from
the table under point 10.
Programming mode - Adjustment of the parameter values
The programming mode is accessed via the menu mode. In this mode,
all adjustable parameters can be modified. As described under the menu
mode, it is possible to view the value programmed for a certain
parameter via a short press of the "Set" button. In order to modify this
value, the "Set" button must be pressed and held until the display stops
flashing. Now it is possible to re-adjust the value via the "Set" and
"Mode" button. In the programming mode, the "Set" and "Mode" button
can also be used as an "UP" and "Down" button. The adjustment
options can be taken from the table under point 10.
8
/0805 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com