Adjustable Parameters And Their Meaning; Sensor With 2 Switching Outputs - turck PS400 Série Mode D'emploi

Pressure Sensor Series PS400/PS500

10 Adjustable parameters and their meaning

10.1 Sensor with 2 switching outputs

Parameter Explanation
Loc Disabling the
programming mode
ULoc Enabling the
programming mode
Unit Display unit
SP1 Switch point 1
rP1 Release point 1
OU1 Function of
output 1
SP2 Switch point 2
10
/0805 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com
Options Function
Programming mode
fully disabled/locked
Programming mode
enabled/unlocked
(default/ex factory)
bar bar (LED green)
psi psi (LED green)
kPa kPa (LED green)
MPa MPa (LED green)
Upper limit value at
which output 1
changes its switching
status
Lower limit value at
which output 1
changes its switching
status
Hno1 Hysteresis function
(N/O = normally open)
Hnc1 Hysteresis function
(N/C = normally closed)
Fno1 Window function
(N/O = normally open)
Fnc1 Window function
(N/C = Öffner)
Upper limit value at
which output 2
changes its switching
status