Introduction; Safety Information; General Information; Correct Usage To The Intended Purpose - turck PS400 Série Mode D'emploi

Pressure Sensor Series PS400/PS500

1 Introduction

Dear Customer!
We would like to thank you for opting for a product from our company
and would like to confirm you in your decision.
The sensors can be programmed on-site for various different
applications.
In order to be able to fully utilise the wide range of functions, we kindly
request you to observe the following issues:
Any person entrusted with the set-up or operation of the device, must
have read and understood this operation manual, in particular all safety
notes.

2 Safety information

2.1 General information

In order to ensure safe operation, the device may only be operated in
accordance to the specifications stated in this operation manual. Further
it is required to observe all legal and safety regulations applicable to the
specific application.
This also applies to the usage of accessories.

2.2 Correct usage to the intended purpose

These devices are designed for indication and monitoring of process
variables. All other forms of usage do not comply with the intended
purpose.
These sensors may not be used as the sole means for prevention of
dangerous machine and system conditions. Machines and systems
must be constructed in such a way, that faulty states cannot lead to a
dangerous situation for the operating staff (e.g. due to independent limit
switches, mechanical interlocking devices, etc.).
2
/0805 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com