turck PS400 Série Mode D'emploi page 36

Parameter Explanation
rP2 Release point 2
OU2 Function of
output 2
EF Extra menue
for additional
settings
Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com
Options Function
Lower limit value at
which output 2
changes its switching
status
Hno2 Hysteresis function (N/O
= normally open)
Hnc2 Hysteresis function (N/C
= normally closed)
Fno2 Window function (N/O
= normally open)
Fnc2 Window function (N/C
= normally closed)
If the display shows
the parameter EF,
the user can adjust
various additional
parameters in the sub-
menu using the "Set"
button.
See 10.1.1
11
/0805